Injection and guide sleeve units
Release time:
2024-03-29 15:04
Source:
There are two types of mold guiding methods and accessories for guide injection and guide sleeve unit types: (A). External guide type (mold base type or called the main guide), (B). Inner guide type (or auxiliary guide). In order to meet the requirements of precision molds, there is a high demand for the use of both the outer guide and inner guide types.
(1). Outer guide type: Generally used in molds that do not require a high degree of precision, mostly with the die base constitutes a unit of trafficking, the main role of the mold is to be installed in the punch press when the edge pieces of the alignment, almost no dynamic accuracy in stamping processing to maintain the effect.
(2). Inside guide type: Due to the progress of mold processing machine, it has been popularized rapidly recently. In addition to the main function of aligning the cutting edges when the die is mounted on the press, it also has the effect of maintaining dynamic accuracy in stamping processing.
(3). Outer and inner guide type: A die uses both outer and inner guides.
3. Punch and female mold unit (round)
(1). Punch unit: Depending on the shape (shoulder type and straight type), length, and ease of maintenance, it is preferable to use the punch unit in conjunction with the platen guide unit.
(2). Mother die unit: round mother die unit is also called mother die guide sleeve unit, its form has a whole piece type and separate type, according to the production quantity, service life and products or punching chip processing, mother die unit combination series are: (A). Directly machining the shape of the female mold using a template, (B). With two beveled clearance sections, (C). Whether or not to use a backing plate, (D). Irregular female mold shapes must have a rotary prevention design.
Next
Related News
1. the design of the mold product feasibility analysis, computer chassis as an example, first of all the components of the product drawings using the design software for the group analysis, that is, we work in the so-called set of drawings to ensure that the correctness of the product drawings before the mold design, on the other hand, you can be familiar with the components of the
Mold normal failure, the number of qualified products produced, called the mold normal life, referred to as mold life, the number of qualified products produced before the first repair of the mold, called the first life; mold a repair to the next repair the number of qualified products produced before the next repair,
Mold is the basic process equipment for mechanical industrial production, is the production of industrial products in the indispensable tools, mold steel made of the performance of the mold needs to be monitored through a strict production process, the production of raw materials for the mold must also undergo a rigorous check to prevent the mold due to material problems
(1) Purpose: so that the equipment can maintain the best performance status and extend the service life, to ensure the normal production. (2) Scope of application: applicable to the repair and maintenance of molds.
Injection and guide sleeve units
There are two types of mold guiding methods and accessories for guide injection and guide sleeve unit types: (A). External guide type (mold base type or called the main guide), (B). Inner guide type (or auxiliary guide). In order to meet the requirements of precision molds, there is a high demand for the use of both the outer guide and inner guide types.
High life mold form and mechanism
Mold in service, contact with the forming blank, resulting in relative motion. Because of the relative motion of the surface, the contact surface gradually lose material phenomenon called wear. Wear loss can be divided into the following categories: